Ultimate Wyze Cam v3 Setup Guide – (Start Monitoring Now)

Setting up your Wyze Cam v3 may not always be straightforward, so this Wyze Cam v3 setup guide will walk you through every step. 

Whether you’re a first-time user or upgrading from an older model, we’ve prepared a thorough guide containing every installation step.

Let’s get started!

The Complete Wyze Cam v3 Setup Guide – 5 Complete Steps!

Tip: Note the SSID and password for your 2.4 GHz Wi-Fi network!

Step #1: Prepare the Camera for Setup

Preparing the Wyze Cam v3 for setup isn’t complex, but it is recommended to prepare some of the requirements for a smooth setup.

You’ll need the Wyze app, the Wi-Fi, and the camera itself all set up properly before you can proceed with the further instructions.

1.1 Download the Wyze App

First, download the Wyze application on your iPhone or Android smartphone.

The application works as the control center for your camera, so make sure it’s downloaded and that it runs the latest firmware version.

1.2 Connect to a 2.4 GHz Wi-Fi

The Wyze Cam v3 only works with 2.4 GHz Wi-Fi, so ensure your smartphone is connected to the 2.4 GHz band of the network.

This only applies to dual-band routers and would be required during the application setup of the camera.

1.3 Unpack Your Wyze Cam v3

Carefully remove the Wyze Cam v3 from the delivery box, along with the supplied equipment.

In the Wyze Cam v3 delivery package, you should see:

• The camera
• A USB cable
• A power adapter
• A mounting kit

All of these components are essential for the setup of the Wyze Cam v3, so keep them close for whenever you may need them.

1.4 Power On the Wyze Camera

The last preparation step is to connect the camera to an outlet using the supplied USB cable and adapter.

Then, wait until the status light turns solid red and starts flashing red, which is an indication that the camera awaits setup.

Alert: If the Wyze Cam v3 red light stays on, hold the “SETUP” button for ~15–20 seconds!

Step #2: Add Wyze to the Application

Once the Wyze Cam v3 is powered on, the next step is to synchronize it with the Wyze mobile application on your smartphone.

The setup is simple and requires following the application prompts. 

Also, locate the “SETUP” button on the bottom of the camera before we start.

Here’s how to add the Wyze Cam v3 to the Wyze application:

• Launch the Wyze app and select “Home” from the menu.
• Once on the main page, press the plus (+) icon in the tab.
• Now, head to “Device” → “Cameras” → “Wyze Cam v3.”
• Wait until the Wyze camera is plugged in and press “Next”.
• Tap the camera’s “SETUP” button after removing the base.
• Now, release the button after hearing “Ready to connect”.
• Tap “I heard, ‘Ready to connect’” in the Wyze application.

Now, the camera is successfully registered with the Wyze application! 

Step #3: Connect Wyze with the Wi-Fi

To setup Wyze Cam v3 successfully, you must pair the camera with a compatible 2.4 GHz Wi-Fi network only if you use a dual-band router.

Well, the application setup will proceed to the “Wi-Fi Setup” stage after successfully recognizing and assigning your camera.

Here’s how to pair the Wyze Cam v3 with a Wi-Fi network:

• Tap on your 2.4 GHz Wi-Fi in the Wyze application.
• Enter the Wi-Fi password, and then select “Next.”
• Wait until you are redirected to your phone’s camera.
• Find the QR code on the bottom of the Wyze camera.
• Hold the camera 6-10 inches from the screen to scan.
• Confirm “I heard, ‘QR code scanned,’” then tap “Next.”

If the connection is successful, the Wyze Cam v3 LED light should temporarily change patterns and then restore normal functionality.

Hence, do not unplug the camera while it is connecting.

Step #4: Name the Camera & Finalize

After connecting to Wi-Fi, the setup stage involves naming your Wyze Cam v3 and completing the setup process within the application.

This will ensure the device is fully integrated with the system, and you will also gain access to advanced user functions.

Here’s how to name the Wyze Cam v3 and finalize the setup:

• First, give your Wyze Cam v3 a name in the text field.
• Alternatively, pick a suggested name and tap “Finish.”
• Respond to the Cam Plus trial prompt, tap “Continue.”
• On the “Things to Try” page, set up Wyze automations.
• Tap “Skip” to complete setup and confirm the installation.

That’s it! All that is left to do is to properly position the Wyze Cam v3 and ensure it covers the monitoring area appropriately. 

Step #5: Position the Wyze Camera

You’re almost done, and you now know how to setup Wyze Cam v3. However, now it’s time to find the perfect spot for your camera. 

So, whether you’re setting it up inside or outside, good placement makes all the difference for motion detection or reliable security.

Indoor Setup for Wyze Cam v3

Set your Wyze Cam v3 on a shelf or mount it on a wall at eye level to watch doorways or rooms.

Keep it away from bright lights or shadows, and check the live view to make sure it’s got a clear shot of the area you want.

Outdoor Setup for Wyze Cam v3

Mount your Wyze Cam v3 under an eave, about ~7-10 feet up, to cover the porch or driveway, using the Outdoor Power Adapter for power.

Angle it to avoid direct glare from the sun, protect the cable from rain, and test the Wyze camera live view to ensure it’s seeing everything clearly.

Wyze Cam V3 Setup–FAQ:

Here are  common questions that may occur during the Wyze Cam v3 setup:

1. How to Test Wyze Cam v3:

Test the live view in the app to ensure the camera streams properly. Walk in front of the camera to check if motion detection works and send alerts as expected.

2. How to Fix QR Code Scanning Issues:

If the Wyze application fails to recognize the camera’s QR code, hold the camera 6–10 inches away, adjust the distance slowly, and tilt the phone to avoid glare. 

Tip: Turn off “Invert Colors” on iOS if needed.

3. How to Optimize Wyze Cam v3 Wi-Fi:

If the camera fails to pair with the network, confirm you’re connecting with the 2.4 GHz Wi-Fi, as 5 GHz won’t work.

Move your router closer or use a Wi-Fi extender to improve the signal. If the problem is associated with a flashing blue light, there is a setup failure.

4. What to Do if Wyze Doesn’t Power On:

If the Wyze Cam v3 refuses to turn on, ensure the USB cable and adapter are securely plugged in.

Try via a different outlet or cable to rule out power issues, and look for the red status light to confirm it’s working.

5. How to Properly Position the Wyze Cam v3:

So, what many users struggle with during the Wyze Cam v3 setup guide is using the included mounting kit to place the camera.

So, select a spot with a clear view, like your front door, and check the broadcast through the live feed.