Razer BlackShark V2 Pro Beeping (Don’t Panic, Easy Fix!)

Well, if you have the Razer BlackShark V2 Pro beeping problem, we can fix this in minutes!

The beeping typically indicates a hardware issue with the Razer headset or, more accurately, an installation problem or malfunctioning equipment.

This is not always lethal and doesn’t mean your BlackShark is due for replacement, so follow the steps here, before rushing to conclusions.

To resolve Razer BlackShark V2 Pro’s beeping, verify the headset is charged to maximum capacity, reconnect it from the PC, and reinstall the Synapse 3 software.

Also, test with a different computer, and factory reset your BlackShark.

Let’s unwrap all the details about the issue!

Why Does My Razer BlackShark V2 Pro Keep Beeping?

So, Razer BlackShark V2 Pro might be beeping as a result of: 

Let’s do our best and try to fix the beeping!

Razer BlackShark V2 Pro Beeping – Quick & Easy Solutions!

Tip: Try all steps chronologically!

1. Reconnect the BlackShark V2 Pro

While the well-designed Bluetooth functionality of the BlackShark allows it to support excellent connection, some users may prefer a traditional 3.5mm AUX connection.

So, the first step to addressing the beeping is reconnecting the headset from your device’s USB or AUX port and re-establishing the wireless Bluetooth connection.

Let’s start with reconnecting the BlackShark’s Bluetooth first!

How to Reconnect BlackShark V2 From Bluetooth?

1. Hold the “Razer SmartSwitch / EQ Button” to exit “Pairing” mode.
2. Open the “Bluetooth” page in the settings of your computer device.
3. Tap on the options button next to BlackShark V2’s connection profile.
4. Choose the “Disconnect” or “Unpair” button to disconnect BlackShark.
5. Place the headset under “Pairing” mode again and reconnect to the PC.

How to Reconnect BlackShark V2 From AUX?

1. Unplug the AUX cable from the back of your computer device.
2. Optional: Unplug the AUX from the Razer sound card interface.
3. Disconnect the other end of the cable from the BlackShark’s port.
4. Wait for 30 seconds and reseat your cable into the headphones.
5. Reconnect the other end to the sound card or your PC directly.

Tip: If using the Razer sound card for a wired connection, plug the USB into a different PC port!

2. Reinstall the Synapse Utility Software

A trustworthy solution for the beeping produced by the Razer BlackShark V2 is to uninstall and reinstall the Synapse 3 software from your PC.

Since the application creates a customizable environment for the headset and installs the necessary drivers, reinstallation might fix the issue.

Let’s learn how to reinstall the Synapse software on Windows and Mac!

How to Reinstall the Synapse Utility On Windows?

1. Access the Windows start menu and open the Control Panel.
2. Click on “Programs and Features” from the on-screen options.
3. Right-click on the Razer Synapse 3 icon once found in the lists.
4. After that, choose the “Uninstall” or “Uninstall/Change” button.
5. Wait for the Razer Uninstallation Prompt and follow the steps.
6. Download the software from the Razer Synapse 3 official page.

How to Reinstall the Synapse Utility On macOS?

1. Open the Launchpad from the Dock and go to “Applications.”
2. Scroll down and locate the Razer Synapse’s icon from the list.
3. Hold the “Option” key (or any app) until all icons start jiggling.
4. Click on the Razer Synapse Software from the on-screen apps.
5. Wait until the software is uninstalled from your macOS computer.
6. Download the Razer Synapse 2 compatible for macOS devices.

Note: Uninstalling Synapse from the “Apps & features” Windows page may not remove all logs!

3. Fully Re-charge BlackShark Pro’s Battery

Another reason why the Razer BlackShark V2 Pro keeps beeping is to indicate that the battery is very low.

To resolve the issue, you must fully re-charge the headset by installing the supplied micro-USB to USB type-A cable by Razor. 

Reminder: Keep in mind that using unoriginal or third-party equipment to charge the headset may degrade the internal battery faster!

How Long Does it Take to Charge BlackShark V2 Fully?

Based on the equipment used, a full recharge of the headset’s battery would take between 3.5 and 4 hours on average.

Using the original adapter supplied by Razer allows your headset to provide up to 6 hours of functionality with just 15 minutes of charging.

Note: Even if directly wired to the PC, the headset does not charge over AUX!

4. Eliminate Wireless Dongle Interference

Any wireless devices operating on the same frequency as the BlackShark V2 can interfere with the headset’s wireless dongle, causing the unusual beeping.

You should be particularly aware of Wi-Fi or other Bluetooth dongles transmitting a 2.4 GHz connection, as that’s the wavelength your headphones use.

How to Eliminate Wireless Interference?

Follow these simple steps to ensure nothing interferes with the BlackShark V2:

• Dislocate wireless devices in between the dongle and BlackShark V2.
• Verify there’s a direct line of sight between the dongle and the headset.
• Move metallic objects or solid furniture blocking the dongle wavelength.

The Razer BlackShark V2’s dongle supports an average connection radius of 15–20 feet (about ~5 meters.)

Moving the headset out of the dongle’s radius while carrying the headset will cause the audio quality to drop, resulting in a connection loss.

5. Re-Add the BlackShark’s Bluetooth Profile (Wireless)

If the BlackShark V2 is still producing the dreaded beeping, the next step is to erase and re-add the Bluetooth profile of the headset.

So, after being connected once, the Bluetooth profile will be automatically registered in your device’s “Bluetooth” menu, allowing for quicker future pairing.

How to Forget BlackShark V2 Profile On Windows?

1. From the start menu, type “Settings” and press enter.
2. Select “Bluetooth & other devices” from the left pane.
3. Ensure the “Bluetooth” activation slider is set to “ON.”
4. Find BlackShark V2’s connection in the devices list.
5. Next, click the three dots and select “Remove Device.”
6. Reconnect the wireless dongle and re-pair BlackShark.

How to Forget BlackShark V2 Profile On macOS?

1. Access the “System Preferences” tab from the finder.
2. Open the “Bluetooth” page from the menu on the left.
3. Select BlackShark V2’s connection from the profiles.
4. Choose the “X” button to finalize BlackShark’s removal.
5. Next, unplug the wireless dongle and reconnect it back.
6. Press on the headphones’ connection to connect again.

Alert: Removing the headset’s Bluetooth profile will erase all pre-configured settings!

6. Switch the Headset to a Direct Connection (Wired)

If the beeping occurs while the headset is wired to the PC, there may be a problem with the Razer sound card.

Hence, this Razer-powered interface utility allows the BlackShark to connect with a computer whose motherboard does not originally come with a 3.5 mm AUX jack on the rear.

In some cases, an underlying defect with the sound card may degrade the Razer headphones’ connection, causing it to beep and lose connection with the computer.

Quick Note: The Razer sound card hub supports only a single 3.5 mm AUX connection!

7. Test the Headset on a Different Computer

A solution against the beeping recommended straight from Razor’s customer support is testing the headset on an alternative computer.

There could be an issue with the audio drivers or the input device interface, unstabilizing the BlackShark headset’s connection and causing it to beep.

How to Properly Test BlackShark on a Different PC?

Testing the headset requires creating a brand-new Bluetooth profile by placing the BlackShark V2 under “Pairing” mode.

Hold the “Razer SmartSwitch / EQ Button” for up to 7 seconds and check if the headphones appear under the “Discoverable Devices” section in the “Bluetooth.”

If the connection with the headphones is successful, the status should change to “Connected” and you will be able to test if the beeping persists.

Quick Recap

To solve the Razer BlackShark V2 Pro beeping, reconnect the headset, recharge the battery to maximum capacity, and reinstall the Synapse utility software.

If the issue is still there, switch to a wired connection and test the BlackShark on a different PC.

Follow us for more Razer BlackShark V2 Pro solutions!