Eufy Monitor Screen Black? (Don’t Panic, Easy Fix!)

Wondering what the Eufy monitor screen black means? Well, this guide covers everything!

So, the inconsistent lighting of the eufy baby monitor can be caused by improper camera positioning, issues with the room’s lighting, or even low-voltage issues.

This guide will help you decipher and solve the exact issue of the eufy black monitor via advanced solutions.

Let’s peek into the solution:

If the display of the eufy monitor appears black, regulate the room’s lightning, power cycle the monitor, and replug the camera. If the issue persists, start and complete a factory reset on the eufy baby monitor.

Let’s investigate further…

Why the Eufy Baby Monitor, Screen Went to Black And White?

To understand the unusual broadcasting behavior of the eufy monitor, it’s important to deeply analyze the symptoms of the monitor and study its functionality.

So, the main culprits for the unexplained black-and-white coloring of the display often include bad or improper lighting.

Here’s why the Eufy baby monitor’s broadcast appears in black and white:

What Does Black and White Broadcast Mean?

While there is no particular feature or setting that allows you to turn the broadcast of the Eufy camera into black and white, the reason is typically the lighting conditions.

In case there is an existing bright light source within the room, it may appear black and white through the camera.

Solution?

That’s why you must isolate the broadcast of the camera as much as possible and stop external light rays from reaching the lenses, as this interferes with the broadcast.

For a deeper look into the issue, continue reading the solutions steps…

eufy Monitor Screen Black – Easy Solutions

Tip: Follow the steps and instructions consecutively!

1. Regulate the Room’s Lightning

If the broadcast of your Eufy monitor has suddenly gone black, there’s a significant chance that the room where the camera is positioned has lost lightning regulation.

Your black and white fragments can be a result of a sudden loss of lightning in the room or an improperly positioned light source.

Here are some essential tips for optimizing the camera room’s lightning source:

• Reduce all light sources in the camera POV field.
• Move the camera away from flat surfaces or walls.
• Don’t point the camera towards any light sources.

Following this instruction should dramatically optimize the performance of the eufy camera’s broadcast and prevent the picture from altering or producing fragments. 

Tip: The night vision mode of the eufy camera functions best when there are no light sources!

2. Reconnect the eufy Camera Unit

A connection failure between the eufy camera and the monitor unit can result in persistent degradation of the broadcast and significantly reduced lightning.

So, you can manage the connected eufy camera unit through the settings of the monitor, with a few simple clicks.

Here’s how to reconnect the eufy camera from the monitor easily:

1. Tap the “Power” button on the eufy monitor to turn it on.
2. Next, tap the “Menu” button to access the settings page.
3. Scroll down and press on the camera icon once found.
4. Select “Add Camera” and follow the on-screen steps.

Re-adding the same camera unit will overwrite the current settings without restoring the camera’s local configuration to defaults. 

This can be potentially helpful if the monitor’s broadcasts remain black or the broadcast is losing quality persistently over the night.

Bonus Tip: Shorten the Wireless Range!

A large distance between the monitor and the camera unit can potentially lead to interruptions in the monitor’s broadcast and issues with the quality. 

That’s why you should shorten the distance between the two devices as much as possible to improve the wireless connection.

Note: The monitor and the camera use a persistent Bluetooth wireless connection!

3. Power Cycle the eufy Baby Monitor

In case of an interruption in the broadcast, it is advised to perform a power circulation of the monitor by temporarily suspending the power supply. 

Unlike other baby monitor installations, with eufy, both of your devices must remain persistently connected with an outlet to function.

Follow these instructions to power cycle the eufy baby monitor:

1. Disconnect the A/C jack from the back of the baby monitor.
2. Unplug the other end of the cable from the electrical outlet.
3. Wait for ~60 seconds while the baby monitor is unplugged.
4. Reconnect the supplying jack into the baby monitor’s port.
5. Next, plug the other end into a functional A/C outlet and test.

Bonus Tip: Power Cycle the Camera!

While you’re at it, you should also perform a power cycle on the eufy camera since it uses the same power equipment as the monitor and can be discharged identically.

Wait for a minimum of 60 seconds before reconnecting any of the devices, to perform a power circulation thoroughly.

Tip: Inspect the condition of the baby monitor and the camera’s power components!

4. Upgrade the eufy Firmware Version

In case of persistent broadcast interruptions, reduced quality, or uninterrupted black screen, eufy strongly recommends uploading the latest firmware version available for the monitor.

You must download the update package manually and then upload it to your eufy monitor’s system.

Two separate types of eufy cameras exist and you must download the correct firmware based on the unit’s SN number.

You can check the serial number of your eufy camera on a sticker at the bottom compartment, right next to the included product information.

How to Update “T8301” or “T8300” Camera SN Setup?

1. Launch a web browser on your computer device.
2. Navigate to the “T8301” / “T8300” Downloads Page.
3. Scroll down and download the latest firmware ZIP.
4. Next, unpack the RAR on your computer’s system.
5. Open the “Read Me” file and follow the instructions.

Tip: To update eufy monitor 2, go to “About Device” → “Check Firmware” in the eufy app.

How to Update “T8302” Camera SN Setup?

1. Head to the “T8302” Downloads Page on the PC.
2. Tap on the download link to acquire the firmware.
3. Unpack the RAR file in the system of the computer.
4. Launch the “Read Me” text file with the instructions.
5. Follow the steps to upload the update to the monitor.

Note: Before following the detailed update instructions, establish a physical connection between your PC and the eufy monitor.

5. Activate a Monitor Factory Reset

You can address any faults with the eufy monitor by restoring the monitor’s settings to factory defaults.

All eufy monitors come with an in-built factory reset button that must be poked with a sharp and pointy object since it can be accessed only through a tiny pinhole on the back side.

Here’s how to restore the eufy monitor to factory defaults:

1. Locate the reset pinhole on your monitor’s back.
2. Use a pin to access the hole and press the button.
3. Release the button after ~15 seconds of holding.
4. Unplug the power cord from the back of the eufy.
5. Reconnect the baby monitor after ~20 seconds.

Unplugging the monitor after holding the reset button allows your eufy to rebuild the system database and erase any corrupted files. 

The longevity of the factory reset may vary, but on the Spaceview eufy monitor, it typically lasts for up to 60 seconds before the monitor can be used.

Alert: Do not interact with the eufy monitor once the factory reset has started.

6. Disassemble the Monitor (Advanced)

In case the eufy baby monitor screen black is due to a hardware failure, the only possible solution is to access the internal components of the monitor. 

A torn ribbon cable, burnt capacitor, or dislocated bridge can interrupt the digital broadcast and cause the display to go blank.

Tip: It is recommended to use a delicate tool kit for accessing the monitor’s compartment.

How to Disassemble a eufy Monitor?

1. Insert a flat heat tool between the display and the rear panel.
2. Use slight downforce to push the display away from the panel.
3. Once loose, carefully lift the display from the rear compartment.

How to Inspect eufy Monitor?

Once the monitor is disassembled, inspect the following within the internal hardware:

• The contact spot of the power button and the pressure plate.
• The condition of the capacitors on the monitor’s motherboard.
• Burnt, ripped, or cut ribbon wires inside of the compartment.

Note: Heavy monitor hardware damage might be irreversible, so if you detect hardware issues, you may need servicing or replacement.

Quick Recap

If your eufy monitor screen is black, perform a power cycle on the camera, regulate your room’s lighting, and then upgrade the monitor’s firmware.

If the issue persists, force a factory reset on the eufy baby monitor. Follow us for more!