eufy Baby Monitor Not Turning On? (Easy Fix!)

Is your eufy baby monitor not turning on? This guide is for you!

The eufy baby monitor is a trusted and effective solution for monitoring your baby with the help of the rechargeable eufy camera.

The monitor may develop a problem as a result of a loose adapter connection or insufficiency of the power supply.

Here’s the quick fix:

If your eufy baby monitor is not turning on, power cycle the device, long-press the power button and alter the electricity source. If the issue persists, check if eufy’s temperature is elevated and replace defective monitor equipment.

Let’s have an in-depth look at the issue!

Why Does My eufy Baby Monitor Won’t Turn On?

Here are the reasons why your Eufy baby monitor is not turning on:

Is eufy Baby Monitor Battery-Operated?

Unlike its competitors or older models, the latest eufy baby monitors are hard-wired and must remain connected to power at all times.

This means that the baby monitor may refuse to turn on due to an issue with the power cord or power source insufficiency.

Battery-Powered Vs. Hard-Wired Baby Monitor
Aspect:	Battery-Powered Monitor	Hard-Wired Monitor
Power Source	The monitor uses an internal (rechargeable) battery pack	Plugs directly with the power supply.
Installation	Easy and quick installation with no cables included.	A direct outlet cable connection.
Features	Has fewer features due to limited voltage.	Has more extensive features due to higher voltage allowance.
Reliability	Moderate reliability with limited lifespan of the battery.	Extensive lifespan but may develop HW malfunctions.
Cost	Lower costs	Higher costs

Let’s explore possible solutions for the baby monitor’s fault!

eufy Baby Monitor Not Turning On – Working Ways to Fix!

Tip: Follow the solutions chronologically!

1. Power On the Monitor Properly

There’s a possibility that you haven’t powered on the eufy monitor properly, therefore it has not responded to the eufy camera.

The eufy’s power state can be regulated solely by the built-in Power button, so pressing it incorrectly prevents the baby monitor from starting on demand.

How to Power On eufy Monitor Properly?

So, by default, you can turn on the eufy baby monitor by pressing the “Power” button once and holding the button for approximately 2–3 seconds.

The display should instantly illuminate after releasing the power button and shortly, the monitor should display the eufy camera’s broadcast.

If the button does not press properly or does not send a request to the motherboard, the device will fail to activate with a single press.

How to Identify Power Button Problems?

You can quickly and easily identify issues with eufy’s power button by the responsiveness and click sound.

If the button is difficult to press or produces any scratching or rubbing noises, there could be an issue with the mechanism. Hence, give the button a firm press to “unclog” it.

Also, Long-Press the eufy Baby Monitor!

If the eufy monitor isn’t turning on as a result of pressing the power button once, press and hold “Power” for 20–25 seconds.

This is a standard method for discharging both the hard-wired and the battery-operated eufy baby monitors without suspending the power supply, partially or fully.

Notice: If the power button does not press properly, the eufy monitor might be due for repairs.

2. Discharge the Monitor’s Hardware (Hard-Wired)

If you’re still encountering issues while attempting to turn on the eufy monitor, discharging the hardware pieces is another excellent solution.

All that a standard power cycle does is drain the hardware of the baby monitor from all electricity and allow it to start up freshly with new power.

Here’s how to power cycle a hard-wired eufy monitor easily:

1. Unplug the eufy’s adapter on both ends.
2. After that, wait for about 10–15 seconds.
3. Reinstall the power adapter and test eufy.

Tip: Inspect the physical condition of the power adapter while it is uninstalled.

3. Re-launch eufy Through the App 

You can operate some of the baby monitor’s features through the eufy Baby app, available for installation on Android and iOS.

As long as the monitor’s profile is added within the app, you will be able to adjust essential features such as startup preferences, monitoring, and display setup.

How to Check if eufy is Added to the App?

Before attempting to relaunch the monitor, you should verify that the eufy’s profile is associated with the application.

You can determine if eufy can be found within the app by heading to “Me” → “My Devices” → “Baby Monitor 2.”

Warning: Baby monitor versions before the “Series 2” may be unable to re-launch via the app.

How to Restart eufy Monitor Via the App?

Follow these instructions to reboot the eufy monitor via the app:

1. Open the eufy Baby app on your mobile device.
2. Tap on the “Me” tab at the bottom of the section.
3. Navigate to “My Devices” → “Baby Monitor 2.”
4. Next, scroll to the bottom of eufy’s settings page.
5. Tap on the “Restart” button and wait 15 seconds.

For the procedure to help, the eufy baby monitor must be supplied with power before activating the reboot.

If there is no visual indication that your eufy baby monitor is turned on, there will be no way of telling whether the reboot worked.

Note: If rebooting eufy was successful, the display should illuminate right after the 15 seconds.

4. Alter eufy’s Power Source (Hard-Wired)

A standard solution for inactive hard-wired eufy baby monitors is to alter the electrical source of the device.

An insufficiency of the electrical source, defective third-party equipment, and even unsecured cable connections can result in power-related issues with your eufy baby monitor.

So, relocate the eufy baby monitor and install the supplied cable into a proven electrical outlet.

You can test an outlet by connecting any electrical appliance or charging your phone, to justify that the selected outlet is working.

Bonus Tip: Remove External Equipment:

To test whether the eufy baby monitor will turn on, ensure no third-party equipment is installed with the device’s power adapter.

This means a direct connection to the outlet, without devices such as power strips, extenders, or smart plugs.

Tip: Contact a technician for underlying outlet malfunctions or unstable voltage.

5. Regulate eufy’s Temperature

The highly elevated internal temperature may have a forceful impact on the eufy baby monitor’s hardware and temporarily prevent it from starting up.

Once overheated, the monitor will power off until the hardware has fully cooled down, and you will be unable to interact with the device during that time.

Notice: The baby monitor’s overheating can last for a while or be instant and spontaneous!

Here are tips to drop down the eufy baby monitor’s temperatures easily:

• Place the eufy monitor in a well-ventilated room.
• Remove dust on the surface around the monitor.
• Move away heat conductors close to the monitor.
• Prevent direct sunlight from shining on your eufy.

Note: It may take up to 3 minutes until eufy’s internal temperatures fully stabilize.

6. Eject eufy’s Internal Battery (Battery-Operated eufy)

Unlike other baby monitor motherboards that are directly supplied through the power adapter, eufy uses a rechargeable battery that plugs into the motherboard instead.

You can address existing issues with the baby monitor by temporarily displacing the battery from the socket.

Notice: The only required tool for opening eufy’s hardware is sharp and thin, preferably a knife!

Here’s how to access and remove the Eufy baby monitor’s battery:

1. Slide in the sharp tool through the monitor’s top and rear panels.
2. Push the tool gently upwards/downwards to detach eufy’s panels.
3. Use a Phillips screwdriver to undo the compartment’s housing.
4. Next, lift the display off and gently disconnect the ribbon connector.
5. Gently pull the red/black wired connector out from the eufy monitor.
6. Lift the motherboard, located on the side closest to the battery pack.
7. Use a knife to gently lift the battery upwards and remove it from eufy.
8. Wait for 30–45 seconds and place the battery pack back in the eufy.

The eufy’s “Safe and Sound, Night and Day” baby monitor technology is powered with the assistance of a 2900mAh rechargeable battery, that provides up to 15 monitoring hours.

Notice: The monitoring hours of older baby monitors are limited to 15 or 20.

Quick Recap

If the eufy baby monitor not turning on, hold the power button continuously and check the device’s power supply.

If the issue persists, temporarily remove the eufy monitor’s battery, inspect the power equipment, and discharge the hardware. Follow us for more!