Worried with Samsung Soundbar Red Light? (4 Easy Solutions)

samsung soundbar red light

If you’re seeing the persistent Samsung soundbar red light, don’t worry and keep reading!

The red light on the Samsung soundbar is quite rare, and in most cases, it has something to do with the microphone input or voice assistant.

So, in this guide, we’ll unwrap everything you can do against the red light and show you how to resolve potential problems in quick instructions.

To fix the red light on your Samsung soundbar, press the crossed-out circular button on the right-hand side of the device’s panel.

If this doesn’t work, unpair your voice assistant, or perform a factory reset on the soundbar.

Let’s review this red light situation in depth, shall we?

What Does Red Light on Samsung Soundbar Mean?

red light on samsung soundbar mean

The red light on the Samsung soundbar commonly indicates that the microphone is off, and in most cases, you can fix the problem with a press of a button. 

However, according to a few online discussions, the red light is sometimes caused by the connected voice assistance, which again, has something to do with the microphone and the voice input.

The right light could also appear as a result of a system bug and might not be resolved as easily as expected.

The solutions are quick, simple, and easy, so let’s take a look!

Samsung Soundbar Red Light – Quick & Working Solutions!

Tip: Try all the steps!

1. Reactivate the Voice Control

reactivate the voice control

The primary indication of the red light on the Samsung soundbar is that the microphone is off, which is designed for voice assistants such as Alexa.

Luckily you can toggle on and off the voice input by pressing the circular button on the top of the soundbar, with a slash through the middle.

When you press these buttons once, the red light should disappear immediately!

If not, press and hold the button for about 10 seconds, restart your Samsung soundbar, and check whether the red light is still there. 

If yes, continue reading…

2. Unpair Your Voice Assistant

unpair your voice assistant

If you cannot stop the red light on your Samsung soundbar by pressing the crossed out circular button, well, unpair your voice assistant.

Samsung soundbars can pair with Alexa, AirPlay or with Google Home if you have a built-in Chromecast.

So, if you have an active connection with a voice assistant, the entire problem with the red light could be coming from your connected device.

So, unpairing it temporarily will reveal the culprit.

How to Unpair Samsung Soundbar from Alexa?

unpair samsung soundbar from alexa
  1. Open the Alexa app on your smartphone.
  2. Go to “Devices” and select your speaker.
  3. Go to “Settings” → “Bluetooth Devices.”
  4. From here, select the Samsung soundbar.
  5. Choose “Forget Device” to disconnect it.

That’s it. When your Samsung soundbar is no longer paired with the voice assistant, if the red light is still there, press the crossed-out circular button once. 

Note: If the Samsung soundbar is connected via Chromecast or AirPlay, go ahead and disband this connection as well, before retrying to stop the red light.

3. Power Cycle Your Soundbar

If you still don’t know how to turn off red light on Samsung soundbar, we recommend performing a soft reset, also known as a “power cycle”.

This is a completely harmless method, which won’t erase anything from your device but will refresh the system and reboot all operational services.

power cycle your soundbar

Here’s how to power cycle the Samsung soundbar in easy steps:

  1. Press the Power button on the remote control.
  2. Then, the Samsung soundbar should power off.
  3. Then, disconnect the power cord on both sides.
  4. Also, unplug the HDMI cable from the soundbar.
  5. Wait for at least 60 seconds for a full discharge.
  6. Reconnect everything and turn on the soundbar.

Now, when the Samsung soundbar is power cycled, go ahead and test whether the red light will still be there.

If yes, press the crossed-out circular button again to check whether this will help.

Note: Is the red light on when your Samsung soundbar is asleep?

4. Factory Reset the Soundbar

factory reset the soundbar

If nothing helps, and the red light on your Samsung soundbar won’t disappear, we recommend performing a factory reset as a last resort.

The factory restoration is the ultimate solution for any issues, including bugged-out red light, but this will unpair and erase all your soundbar settings.

Note: Different Samsung soundbar models reset in different ways!

Method #1 Reset via Power Button

  1. First, power off the soundbar using the remote.
  2. Then locate the Power button on the soundbar.
  3. Press and hold the button for 5 to 10 seconds.
  4. Release, whenever you see “INT” on the screen.
  5. Wait for your soundbar to reboot at factory reset.

Method #2 Reset via Volume Buttons

reset via volume buttons
  1. Power on your soundbar and verify it’s working.
  2. Locate the Volume (+) and Volume (-) buttons.
  3. Press and hold both buttons for 5–10 seconds.
  4. Release when you see the “INT” screen prompt.

When your Samsung soundbar is factory reset, check whether the red light is still there, and if yes, try disabling it again by pressing the crossed-out circle button.

Reset Alternative: If these reset methods don't work for you, power off the soundbar and hold the “Play/Pause” button on the remote control for 10 seconds until you see “INT” on the screen.

Wrapping Up

So, if you’re seeing a Samsung soundbar red light, it’s enough to press the button with an icon of a crossed-out circle to reactivate the voice input.

If this doesn’t help, we recommend unpairing your voice assistant or factory resetting the soundbar.


We hope this guide was helpful, so follow us for more!