How To Reset Homepod Mini Without WiFi? (Simple Steps)

If you don’t know how to reset HomePod mini without WiFi, then this tutorial is just for you!

Without internet access, the Home app prevents you from accessing the system functions and therefore initiating the reset.

So, in this guide you will learn:

• Method #1 – How to conduct a physical reset without Wi-Fi access
• Method #2 – How to initiate a PC or Mac reset without Wi-Fi access
• Method #3 – How to perform the standard, non-system “hard reset”

How to Reset HomePod mini Without Wi-Fi? – 3 Unique Ways!

Warning: A factory reset will erase all content and settings on your HomePod mini!

Method #1 Hard Reset (Non-OS Reset)

A simple hard reset (or power cycle) may save you the worries of restoring your HomePod to default settings and then having to reconfigure everything.

Instead, the power cycle aims to “discharge” your speaker out of the power supply and serves the purpose of a “small” reset.

Follow these steps to perform a “Hard” reset on your HomePod:

1. Unplug the HomePod mini’s adapter from the outlet.
2. Wait for ~60 seconds while the Pod is disconnected.
3. Reconnect the HomePod’s adapter into the A/C outlet.

Shortly after the speaker turns on, check if you’re still experiencing the problem you’ve had.

If you wish to simply restore the HomePod mini’s settings without a particular problem to solve, proceed with the second method.

Method #2 Conduct a Physical OS Reset

If you’re still wondering how to factory reset HomePod mini without WiFi, then you probably haven’t heard of the physical OS reset.

You can restore all of the HomePod’s system settings without having access to the Home application by simply pressing and holding the top panel.

Here are the specific steps for the physical reset:

Step #1 Unplug the HomePod mini

Start by disconnecting the HomePod mini from the power supply and waiting for approximately 30–40 seconds.

After about a minute has elapsed, plug the HomePod mini back in and allow the speaker to undergo a boot sequence for about 10–15 seconds.

Step #2 Initiate the System Reset

After no more than 20 seconds of reconnecting the HomePod, place your hand on the top panel and keep holding until the white spinning light turns solid red.

That’s the main indication that the HomePod has initiated the reset, but DO NOT release until you hear three consecutive beeps.

Step #3 Wait for the 3 Beeps Signal

The final indication of a successful system restoration is three consecutive beeps produced by the speaker.

After the third beep has sounded out, you can release the HomePod mini and all system settings will be restored to defaults. 

Method #3 Reset Via iTunes/Finder

Factory resetting your HomePod mini over a wired connection with your PC is also considered a type of offline reset, as no access to the Home app is required. 

• If you’re on a Mac, you only need a USB type-C cable.
• If you’re on a PC, you need a USB 2.0/3.0-to-USB-C and the iTunes launcher. 

Now, proceed with the appropriate steps based on your computer’s OS!

How to Reset HomePod mini Without WiFi On Mac?

The “Finder” method means a factory reset via a direct connection with your MacBook or iMac and all you need is a USB type-C cable to connect the HomePod.

In fact, your Mac computer doesn’t even require a connection to the internet or Wi-Fi to reset the HomePod mini settings.

Step #1 Connect the HomePod mini

Start by establishing the physical connection between your HomePod mini and your Mac.

As mentioned, you need a USB type-C cable, supported by both your speaker and Mac computer.

Then, relocate the HomePod mini close to your computer and connect either end of the cable to establish a local connection.

If the connection is successful, the device connection prompt will appear on your Mac, which will notify you that the HomePod mini is now there and discoverable. 

Step #2 Find the HomePod’s Profile

Now, launch the “Finder” app on your Mac and locate the HomePod mini’s tile on the side menu.

The speaker should appear right under the “Locations” section and with a single press, you will gain access to all of the system functions.

Step #3 Initiate the Factory Reset

Now that you’ve successfully connected to the HomePod and accessed the options, locate the “Software” tile in the menu and click on “Restore HomePod…”.

So, shortly after confirming the reset, your HomePod mini will power off, and the factory reset will be initiated.

Warning: Do not interact with the HomePod for at least 60–90 seconds after the reset starts. 

How to Reset HomePod mini With No WiFi On PC?

If you don’t have the iTunes launcher, your PC will require access to the internet to download the latest version of the app.

If you already have it installed, neither your PC nor HomePod will require internet for the reset.

Step #1 Connect the HomePod

Resetting your HomePod on PC is the same as resetting it on Mac, but you would first need to figure out a way to plug the HomePod physically.

• Most PC cases do not natively support a USB type-C input, so you would need an adapter that will convert the connection.

Once the HomePod mini is connected, your Windows PC will send a “New Device” notification, if the speaker was recognized.

Step #2 Download & Install iTunes

The next step is to install the iTunes launcher on your Windows PC.

You can acquire the latest version of Apple’s iTunes through the official website on your Windows computer.

Once you’ve downloaded the package, run the installation and specify a directory for the iTunes application. 

Step #3 Initiate the OS Reset

Now, launch iTunes on your PC, double-check if the HomePod is connected, and select your HomePod in the side “Devices” menu.

Similar to the “Finder” reset on Mac, locate and press the “Restore HomePod…” button in the menu.

Warning: Do not unplug the HomePod mini from the PC until the reset is finalized.