Bauhn TV Not Turning On? (Fix It Fast Yourself!)

Is your Bauhn TV not turning on? It could be frightening, but don’t worry and keep reading!

The Bauhn TV could refuse to turn on due to issues with the power supply or unexpected failure of the internal hardware components.

If there are no indications at all that the TV is receiving power, we will undergo some expert troubleshooting to restore the TV functionality!

If the Bauhn TV isn’t turning on, power on the TV via the physical power button, attempt to change the input and inspect the power cord. Next, plug the TV into a different outlet and replace the TV’s supply cable.

Let’s dig deeper!

Why My Bauhn TV Won’t Turn On?

The Bauhn TV could refuse to turn on due to issues with the main power supply, an issue with the TV or remote’s power button and hardware malfunctions.

So, understanding why the TV could defect is essential throughout the guide, as the solutions require a good understanding.

Here are all the possible causes why Bauhn TV is suddenly refusing to turn on:

This is what could defect the Bauhn TV and prevent the device from turning on entirely.

Advanced further into the guide to review proven troubleshooting solutions for your TV problem.

Bauhn TV Not Turning On – Here’s How to Fix

Tip: Follow the steps in chronological order!

1. Try the TV’s Physical Power Button

As already established, the remote’s power button isn’t the only method to turn on the Bauhn TV, as there’s another built-in Power button on the TV’s rear panel. 

All you need to do if you’ve lost the remote control is locate the alternative button and hold it for up to 3 seconds, which should power on your Bauhn TV instantly.

You can use the built-in power button to turn the Bauhn TV On and Off based on its current power state.

If the Bauhn TV is connected to a power supply and all internal components are fully functional, the power button should turn on the TV after holding it for about 3 seconds.

Notice: If the power button is stuck or can’t be pressed, try to apply mild force inwards and unstick the button (if possible).

2. Attempt to Change the Input

If the Bauhn TV’s screen suddenly turns black and you’re unable to operate the device, you may have accidentally selected an empty or malfunctioning input.

The TV must always be set to an input that has a functional third-party device connected via a video cable.

So, press the “Source” or “Home” button on the Bauhn TV’s remote control to bring up the menu and highlight one of the available, utilised inputs. 

If multiple HDMI devices are connected to the Bauhn TV, ensure they are also turned on and examine their outputs to ensure they reach your TV.

Alert: A malfunctioning TV input will interrupt the broadcast transmitted by the device.

3. Discharge Bauhn TV’s Hardware

You can address temporal A/C issues with the Bauhn TV by fully discharging the TV’s internal hardware components.

For this purpose, you must temporarily suspend the current electricity flow of the TV by unplugging the power adapter from the TV and the electrical outlet at once.

Here’s how to achieve a total discharge of the Bauhn TV’s hardware easily:

1. Press the “Power” button on the TV’s back for 10 seconds.
2. Disconnect the TV’s power cable from the electrical outlet.
3. Unplug the other end of the cable from the TV’s power port.
4. Wait for 60 seconds while the power adapter is unplugged.
5. Reconnect the power adapter back into the electrical outlet.

The Bauhn TV’s electricity will be completely drained upon disconnecting the supplying cable from the electrical outlet.

While the TV is unplugged, inspect the condition of the supplying equipment, including the power cable and the supplying outlet of Bauhn, for any damages.

Tip: Keep the TV disconnected for as long as possible.

4. Inspect the Bauhn TV Remote Control

A defective remote control will prevent the Bauhn TV from turning on upon pressing the “Power” button on the tip of the remote. 

Multiple possible solutions exist for a malfunction with the remote, each involving a different action on the battery compartment or the IR blaster.

Here are reliable solutions to fix the Bauhn TV remote control!

Power Reset the Bauhn TV Remote Control

The first solution against issues with the remote control is to take out the batteries and wait for 30 seconds.

Now place the batteries back in. Hold each button on the remote for up to 5 seconds.

Replace the Bauhn TV Remote’s Batteries

If simply discharging the remote did not help with the communication faults, insert a fresh CR2025 3V cell battery into the remote to restore the unit’s infrared blaster communication. 

Check the Remote Buttons for Obstructions

Some of the buttons on the remote, including the power button, might have been blocked or obstructed due to dust accumulation and debris.

Clean the plastic cover of the Bauhn remote. After verifying that the remote is clean and functional, press the “Power” button and attempt to turn on the Bauhn TV.

Ensure there is a direct line of sight between the remote’s IR lamp and the frontal receiver of the remote; otherwise, the Bauhn TV won’t turn on after pressing “Power.”

5. Uninstall Third-Party Power Equipment

Malfunctioning third-party equipment can congest the active current of the electrical outlet and suspend the supply reaching your TV’s power port.

To determine whether the electrical fault is caused by the TV or malfunctioning equipment, you should test the TV’s power cable directly.

Remove the following third-party equipment from the Bauhn TV’s setup:

• Power adapter extenders or connectors.
• Outlet adapters, smart plugs and covers.
• Power strips, dividers or other re-routers.

Once the unnecessary equipment is removed from the setup of the Bauhn TV, connect the device’s power cable directly to an outlet to test the functionality.

Verify that the power cord is securely plugged on both ends and there are no loose connections in the TV setup.

Note: Keep the TV plugged in directly into the outlet until the end of the guide.

6. Alter Bauhn TV’s Electrical Outlet

The power fault of the Bauhn TV could be produced by a low outlet voltage, preventing the device from withdrawing enough supply.

The next step should be to attempt to power the TV through a verified electrical outlet and determine whether the withdrawn electricity is enough.

Here’s how to alter the power income of the Bauhn TV in easy steps:

1. Unplug the power cable from the back of the Bauhn TV.
2. Disconnect the other end of the TV from the A/C outlet.
3. Relocate all the TV’s equipment next to another outlet.
4. Plug the power cable back into the Bauhn TV’s connector.
5. Connect the other end of the cable to a proven A/C outlet.
6. Try to power on the Bauhn TV through both power buttons.

The cable connection with the TV’s new outlet must be proper to securely deliver a consistent and uninterrupted power supply to the motherboard.

In case of a power cord failure, your TV could lose power supply periodically, display consistent black screens or refuse to power on.

Tip: Ensure that the new electrical outlet is fully functional.

7. Replace the TV’s Supplying Cable

If you still can’t turn on the Bauhn TV, there’s a significant chance that the power supply cable is no longer working correctly.

In that case, your next step should be to install a brand new adapter and cable compatible with the ports on the Bauhn TV to restore the power income and turn it on.

The most crucial factor is whether your type of Bauhn TV uses a two or three-prong supplying power cable.

Once you have gathered more information about the TV’s compatibility, install the new adapter into your TV’s power port and test whether your Bauhn TV will finally turn on.

Quick Recap:

Whenever the Bauhn TV not turning on, change the selected TV input, perform a power cycle of the hardware and alter the TV’s electrical outlet.

Additionally, remove third-party outlet equipment and replace the power cable. Follow us for more!