Oculus Quest 2 Not Updating? (Don’t Panic, Easy FIX)
If you’re wondering why the Oculus Quest 2 not updating, you’re not alone, so keep reading!
Many users have encountered a system issue while applying the latest firmware version to their Oculus Quest 2 headset.
In this guide, we will uncover all possible reasons for the Oculus Quest 2 headset updating issue and provide top-tier troubleshooting solutions to attempt right away…
Whenever the Oculus Quest 2 headset isn’t updating to the latest firmware, first inspect the Wi-Fi connection and verify that the equipment is charged. If the issue persists, you must download the Meta Quest app and restore the Oculus equipment to factory defaults.
Keep reading to learn more about the issue!
Why is My Oculus Quest 2 Not Updating?
Those are the potential causes for updating issues on Oculus Quest 2:
How to Update Oculus Quest 2 in Easy Steps?
Follow these instructions to update the system version of the Oculus Quest 2:
- Press the “Oculus” button on the right-hand controller.
- Next, select the “Settings” (gear icon) button at the top.
- Use the thumbstick to scroll the settings menu down.
- Highlight the “About” tab and access the config menus.
- Select “Install Update” and follow the on-screen steps.
So, do not interact with the Oculus headset once the update process has started.
As long as the equipment is connected with Wi-Fi, the update process should typically last 2-3 minutes, based on the device’s performance and the connection’s strength.
Note: If the update fails, the headset will notify you of the error!
Oculus Quest 2 Not Updating – 6 Effective & Quick Solutions!
Tip: Follow the steps and instructions in order!
1. Re-Connect the Headset to Wi-Fi!
To consistently download and install updates on the Oculus Quest 2, your VR headset must always remain connected to the Wi-Fi.
Hence, the first and most crucial step is to verify that the Oculus Quest headset has successfully established a connection with your home Wi-Fi network.
Here’s how to connect the Oculus Quest 2 to a Wi-Fi network:
- Access the universal menu on the Quest 2 headset.
- Hover over to “Quick Settings” and access “Wi-Fi.”
- Wait until the available networks are shown on-screen.
- Pick your home Wi-Fi network from all the networks.
- Next, input the SSID password and press “Connect.”
- Wait until the headset establishes a Wi-Fi connection.
Tip: You could also update the Quest 2 to Wi-Fi through the Meta Quest mobile app!
Helpful Tips to Improve Wi-Fi Connection!
Here are some proven methods to improve the Wi-Fi efficiency of Oculus Quest 2:
- Perform a “power cycle” on the network router or modem.
- Reset the coaxial service connection of the router device.
- Place the network router closer to your Oculus equipment.
- Reduce the network bandwidth usage as much as possible.
Note: If you’re persistently experiencing Wi-Fi issues, contact your ISP for assistance!
2. Reboot the Oculus Quest 2!
Typical issues with the updating process on Oculus Quest 2 can be addressed by simply rebooting the equipment.
The headset has an in-built power button that allows for quick and efficient system deactivation, and pressing the button again will reboot the Oculus headset.
Here’s how to reboot the Oculus Quest 2 equipment in easy steps:
- Take off the headset and locate the power button on the side.
- After that, press and hold the power button for 15-20 seconds.
- Once the LED of the Oculus deactivates, wait for 10 seconds.
- Press the power button for 5 seconds to turn on your Quest.
- Navigate to “Settings” > “About” > “Instal Update” and start.
Note: Restarting the headset typically fixes non-lasting and temporary functionality errors!
3. Recharge the Oculus Equipment!
If the Oculus Quest 2 equipment doesn’t remain consistently connected to the USB port of your computer, it is necessary to recharge the headset and controllers manually.
Both Oculus Quest controllers and the headset have a USB-type C port, so you need a USB-C charging cable.
Tip: You can charge the Oculus equipment through a USB port on your computer or directly into an electrical outlet by connecting a power adapter to the type-C cable.
How to Charge an Oculus VR Headset?
- Locate the charging port on the bottom part of the VR headset.
- Connect the type-C cable to your computer or into an outlet.
- Plug the other end of the type-C cable into the Oculus headset.
- Wait for 30-40 minutes until the VR headset is charged enough.
How to Charge Oculus VR Controllers?
- Locate the charging port on the frontal panel of your controller.
- Connect a type-C cable to the controller and into a power source.
- Wait for 30-40 minutes until the Oculus controller has recharged.
- Test the controller by turning on and updating the Oculus Quest.
Alert: The Oculus Quest 2 controllers must be charged individually!
How to Install Oculus Quest Charging Dock?
It is advised to install a Quest charging dock to stop bothering with cables and save a lot of time from connecting and disconnecting equipment.
Hence, you must plug the charging dock with an electrical power supply and position the headset and controllers into their spacing.
Note: Once all the equipment has made contact, the LED on the dock will blink twice!
4. Update Oculus Quest via USB!
It is possible to update the firmware of the Oculus Quest 2 externally by connecting the headset to your computer system and utilizing the Quest desktop application.
Thus, all you have to do is enable the “USB Update Mode” on the Oculus Quest headset before connecting it to the PC!
- To turn on the Oculus “USB Update Mode,” power off the headset and hold the “Power” and “Volume Up” buttons simultaneously. In 10 seconds, Oculus will enter USB Mode.
Alert: Pressing the “Power” and “Volume Down” buttons will factory reset the Oculus Quest!
How to Update Oculus Quest Via USB?
The Oculus headset doesn’t have to be connected to Wi-Fi to update via USB!
- Verify that the Oculus is already in USB mode.
- Connect the headset via USB to your computer.
- Download the Oculus Quest desktop platform.
- Sign in to your Oculus user account registry.
- Within the app, select “Settings” > “Devices”.
- Then, choose “Quest 2” and press on “Update.”
Notice: As long as the USB connection is not interrupted, the Oculus will update successfully!
5. Set up the Meta Quest Application!
There is a way to remotely activate the pending firmware update of the Oculus headset in case the headset fails to utilize the update by itself.
For this purpose, you must download and install the Meta Quest app on your mobile device, available for both Android and iOS smartphones.
Here’s how to set up the Meta Quest app in easy-to-follow instructions:
- Open the Google Play/App Store on your Android/iOS device.
- Tap the search field and type “Meta Quest” before searching.
- Finally, tap the first result and download the Meta Quest app.
Tip: Activate “Automatic Updates” for the Meta Quest app after installing it!
How to Update Oculus Via Meta Quest App?
Once the app is set up, turn on your phone’s Bluetooth, open the app, and sign into your Oculus Meta user account.
On the head prompt, select your “Oculus Quest 2” device and complete the pairing process to add the Oculus Quest 2 to the “Devices” page within the Meta Quest app.
In addition, the Meta Quest app provides advanced settings for the Oculus headset through the “Device” menu.
- To configure the settings of the headset, go to “Devices” > “Oculus Quest 2”.
Note: Once the Oculus setup is complete, all pending updates will start automatically!
6. Restore the Oculus to Factory Defaults!
If the Oculus Quest 2 still refuses to update, you should perform a factory reset on the headset system.
There could be an underlying fatal issue with the firmware, such as corrupt or missing files and misconfigured settings, preventing Oculus from updating.
Here’s how to perform a factory reset on the Oculus Quest 2 equipment:
- Power off the Oculus headset by holding the “Power” button.
- Once the Quest powers off, hold “Power” and “Volume Down.”
- After 10 seconds, the factory reset screen will appear on the VR.
- Follow the reset instructions to erase all stored system content.
Reminder: You have to complete the initial setup of the Quest after the reset!
More Oculus Quest 2 Errors:
Q: How to fix Oculus Quest 2 stuck on pairing screen?
A: Restart your phone and headset, then try pairing again via the Oculus app.
Q: What to fix Oculus Quest 2 stuck on the boundary screen?
A: Restart the headset, reset the guardian, or recalibrate the boundary.
Finn Wheatley, a Master’s graduate in Computer Science from UCL, London, honed his skills at small data science consultancies. There, he helped large corporations enhance their data capabilities by deploying cutting-edge machine learning analytics and resolving technical hurdles.