Your Onn Roku TV Stuck On Logo Screen? (Let’s Fix Fast!)

If your Onn Roku TV is stuck on logo screen, don’t panic! This problem can be solved easily!

When onn Roku TV gets stuck on the logo screen this essentially shows that something with loading up the operating system went wrong.

Typically, a TV restart solves the problem, but in many cases, this doesn’t help, so you must take a few extra steps that we’ve prepared below.

Here’s a quick list of everything you should try:

Let’s get into the guide and break down each of these solutions!

How To Fix When Onn Roku TV Stuck on Logo Screen?

Note: Have you tried waiting on the logo screen for 5–10 minutes to see if the system will load?

1. Soft-Reset the Onn Roku TV

If your Onn Roku TV is stuck on the logo screen, the first and simplest step to undertake is to soft reset the television, also known as a “power cycle”.

This method will not erase anything from the onn Roku TV, but will reboot the operating system and discharge the TV’s hardware.

Here’s how to soft reset your onn Roku TV in easy steps:

1. Using your remote, power OFF your Roku TV.
2. Unplug the power adapter from the wall outlet.
3. Wait for at least 60 seconds for a power cycle.
4. Connect the power adapter back into the wall.
5. Check whether Roku TV will get frozen again.

If this doesn’t help, don’t panic and continue reading…

2. Disconnect External Devices

Sometimes the reason why Roku TV gets stuck on the logo screen is because of an external device connected to the TV.

This could be anything including soundbars, computers, speakers, headphones, TV players and more, so it’s recommended to temporarily unplug everything.

Take a look at the back of your onn Roku TV and unplug the following:

• HDMI cables
• AUX cables
• HDMI (ARC)
• RCA cables
• Ethernet wire

Verify that the only cable connected to the Roku TV is the power adapter and reboot your TV.

3. Inspect the Electrical Supply

In many cases, the reason why the onn Roku TV is stuck on startup screen is the electrical supply, especially when the voltage keeps fluctuating.

This could prevent the onn Roku TV from loading the Roku operating system past the logo screen.

Essentially, this creates a restart loop in which your TV shuts down just before loading the OS, showing the Roku logo, and then restarting.

To prevent this from happening, there are a few things you could try:

• Verify that the used electrical outlet is working well.
• Unplug third-party devices (dividers or extenders).
• Connect the power adapter directly into the socket.
• Plug your onn Roku TV into a different wall socket.

If your onn Roku TV gets stuck on the startup screen even in a proven-to-work power outlet, the reason is unlikely to be related to the power supply.

So, continue reading further into this guide!

4. Prevent Roku TV Overheating

Another possibility for constant Roku TV startup issues is overheating, which is a problem that can prevent the TV from starting up.

When your onn Roku TV is overheating the hardware will automatically shut down the system in an attempt to lower the heat and prevent lethal damage.

Hence, you might need to check whether the TV is overheating by touching the back panel and if it’s unusually hot on the touch, you can justify this.

If your onn Roku TV is overheating, here are a few things to do:

• Turn off the TV for 10–15 minutes to cool off.
• Unclog the ventilation openings on the panel.
• Dislocate heat conductors near your onn TV.
• Prevent direct sunlight from shining on the TV.
• Ventilate the room to a balanced temperature.
• Use a conventional fan to blow against the TV.

If your TV is able to get past the logo screen after cooling down, then overheating is the culprit and, you must make sure to regularly clean the vents.

Important: If your onn TV is overheating constantly, it’s better to attempt to claim the warranty.

5. Reset the Roku TV to Default

One of the best methods when the onn Roku TV stuck on logo screen is to perform a factory reset by using the built-in Reset Button.

This operation will permanently erase everything from your onn Roku TV and reinstall the operating system bringing the TV in an out-of-the-box state.

Notice: If you cannot reach the Roku TV menus and settings, be aware that ALL settings will be lost and, you’ll need to reconfigure them from scratch.

Here’s how to factory reset your onn Roku TV:

1. First, locate the Reset pinhole on the onn TV back.
2. Verify the TV is on (even if stuck on the logo screen).
3. Use a paperclip or toothpick to reach in the pinhole.
4. Push inwards to press and hold the “Reset” button.
5. Hold for approximately 15 seconds to trigger a reset.
6. Your onn Roku TV will power off and then power on.

This time around the onn Roku TV should load past the logo screen with a freshly installed OS and, you’ll forget that the problem ever existed.

Reminder: You must carry out the initialization steps and connect your onn Roku TV to Wi-Fi.

Roku TV Is Still Stuck on Logo Screen?

If you’ve tried everything but the onn Roku TV still freezes on the logo screen, perhaps you’re facing a hardware-related problem.

The main suspect would be the power supply board, so it’s advised to attempt to claim your onn Roku TV warranty or get in touch with the local merchant.