Is Your Eufy Monitor Not Charging? (Best Ways to Fix)

To determine why the Eufy monitor not charging, stay with us throughout this short guide!

The eufy baby monitor may develop an issue with the charging as a result of a battery fault, equipment defects, or elevated hardware temperature.

The eufy baby monitor runs on a 5200 mAh rechargeable battery and unlike hard-wired monitors, eufy can be placed anywhere.

However, let’s take a quick look at the quick solution:

If your eufy baby monitor isn’t turning on, check all your connections on the charging equipment, alter the charging source, and check the charging port. If the issue persists, factory reset the eufy baby monitor.

Let’s analyze the eufy baby monitor’s issue further!

Why is the eufy Baby Monitor Not Charging?

Unlike hard-wired baby monitors, eufy’s 5200 mAh rechargeable battery allows for up to 30 hours of regular monitoring or up to 12 hours of continuous check-ups.

So, the sudden charging fault developed by the monitor can be primarily caused by the device equipment or the source.

Here’s an organized list containing all causes for the Eufy monitor’s startup issues:

How to Check if eufy Monitor is Charging?

You can identify eufy’s charging status through the LED indicator right next to the charging port on the device.

So, if the LED indicator has turned solid white, it means that the baby monitor is charging successfully and you shouldn’t interfere.

In contrast, a pulsing red or white LED light is an indication of a low or improperly charged unit battery.

An incorrect insertion of the monitor’s internal battery might lead to false readings by the LED sensors, so it’s important to acknowledge this.

Let’s continue with the best solutions for eufy’s charging issues!

eufy Monitor Not Charging – Easy Fix Methods

Tip: Follow the methods consecutively!

1. Secure eufy’s Charging Equipment

The first step is to secure the baby monitor’s charging equipment to ensure that the electrical supply is reaching the internal battery successfully.

A loose or unstable cable connection on either end will prevent the monitor from charging or cause a false indication on the LED lamp.

Let’s review all connections of the eufy monitor’s charging equipment!

The USB Cord’s Adapter Connection

You must ensure that the monitor’s charging cord is properly secured with the power adapter that conducts the electrical supply from the outlet.

You can verify that the cable is connected securely by unplugging it for 5–6 seconds and then plugging it back in.

The USB Cord’s Monitor Connection

The connection on the monitor’s end is the next important connection of the eufy’s USB cable.

Verify that the cable is securely connected with the charging port on the side of the eufy baby and check the charging indicator on the side.

The Adapter’s Outlet Connection

Finally, you must verify that the charging adapter of the monitor’s equipment is properly installed into the electrical outlet.

Well, a loose or unstable adapter connection can lead to charging faults with the monitor and prevent the voltage from reaching the internal battery.

Notice: Try to spot any damages on the charging equipment of the eufy monitor.

2. Charge eufy Via Alternative Outlet

Well, another quick and easy solution to eufy’s charging issue is to install the equipment of the monitor into an alternative, proven outlet. 

You can test if your power outlet is functional by installing a low-voltage electrical appliance, such as a lamp, LED lights, or even a TV.

After verifying that the particular outlet is delivering proper voltage, relocate the baby monitor along with all of its charging equipment.

Once connected to the charging adapter, reinstall the micro-USB cable in your eufy monitor’s charging port and check the charging indicator’s color.

Bonus Tip: Check the A/C Outlet’s Switch!

Most modern electrical outlets come with power controllers, allowing the user to turn off the outlet’s power consumption while it is not in use.

If the baby monitor refuses to charge through multiple electrical outlets, check if there’s a built-in power button that controls the power outlet.

Tip: It is advised to consult with a technician in case one or more of your outlets are defective.

3. Check eufy’s Port for Obstructions

The charging may be partially or entirely disrupted due to obstructions on the baby monitor’s charging port.

So, the next step is to conduct a thorough inspection of eufy’s charging port and detect any obstructions that are preventing the USB wire from plugging securely, all the way in.

Here’s how to clean any obstruction on the eufy monitor’s charging port:

1. Apply cleaning solution to the surface of an ear stick.
2. Next, detach your eufy’s charging cable from the rear.
3. Insert the ear stick into the port and collect debris/dust.
4. Wait until the input port fully dries up and recharge eufy.

Note: A dusty or unclean environment can lead to the development of charging port obstructions.

4. Wait Until the Monitor Cools Down

The primary reason why the eufy baby monitor battery not charging is because of an elevated hardware temperature.

Not allowing the baby monitor to fully cool down before connecting it to the charger can prevent the internal battery from refilling due to consistent HW overheating.

When Does eufy Baby Monitor Overheat?

The eufy baby monitor is designed to function between 32°F and 95°F / 25°C and 35°C.

So, if eufy’s internal temperatures escalate under any circumstances, the device enters “Overheating” mode and shuts down until it has fully cooled down.

Note: While the monitor is still under “Overheating” mode, you will be unable to recharge the device’s internal battery. 

How Long Does eufy Monitor Cool Down?

On average, it takes the eufy monitor under 2 minutes to cool down once it has trespassed the overheating margin.

This only applies when the eufy monitor is in a well-ventilated and dust-free environment, otherwise, it may take the monitor up to 5 minutes for the unit to fully cool down.

Warning: Extended overheating can cause the eufy monitor’s hardware to malfunction.

5. Replace eufy’s Charging Equipment

If the eufy monitor is still experiencing charging issues, you should attempt to refill the monitor’s battery alternative charging components.

As established, eufy’s charging equipment consists of a micro-USB wire and an A/C adapter, so you can use any of your old phone chargers to test.

How to Replace eufy Monitor Charging Cable?

To test the eufy monitor using an alternative micro-USB, unplug the current charging cable from the adapter and install the new one.

Plug the cable back into your monitor’s charging port and check the status of the indicator.

How to Replace eufy Monitor Charging Adapter?

If eufy’s charging did not improve upon installing a replacement micro-USB, the problem can be caused by a malfunctioning adapter.

So, to determine if the display will start charging, install an alternative power adapter with the current micro-USB wire and check the indicator LED’s status.

6. Restore the Monitor to Defaults

If the eufy monitor is still refusing to charge from the outlet, you should initiate a factory reset by poking the built-in “Reset” button on the rear panel.

Restoring eufy to factory defaults will erase all existing system and monitoring settings of the device, returning you to “Initial Setup.”

Follow these steps to factory reset the eufy monitor in easy steps:

1. Connect the eufy baby monitor with a charging outlet.
2. Locate the “Reset” pinhole on the charging stand’s back.
3. Insert a pin or a paperclip into the pinhole and press down.
4. Release the button after 10 seconds to initiate the reset.
5. Wait until the eufy baby monitor has finalized the process.

Alert: Do not interact with the monitor or press any buttons while the device is still charging.

7. Re-insert eufy’s Internal Battery

So, eufy’s charging failure can be caused by a potential displacement or defect with the internal rechargeable battery unit.

That’s why the next step is to detach the battery from the monitor, wait until the hardware fully discharges, and place the unit back into the monitor’s socket.

Here’s how to re-insert the eufy monitor’s rechargeable battery:

1. Power off the baby monitor and unplug the supplying cable.
2. Use a sharp knife or an iFixit opening tool to lift the display.
3. Push each of the three notches on the side panel of the eufy.
4. Using slight force, detach the monitor’s display from the base.
5. Locate the battery compartment on the eufy’s inner base part.
6. Unplug the supplying motherboard cable from the battery unit.
7. Wait for 30–35 seconds and reconnect the battery’s adapter.

Tip: Try to notice any damages on the outer periphery of the eufy monitor’s battery, which may suggest the actual culprit for the charging problem.

Quick Recap

So, whenever the eufy monitor is not charging, inspect the connections on the monitor’s charging equipment and alter the electrical outlet.

If the issue persists, re-insert eufy’s internal battery, replace the power cord, and reset the monitor. Follow us for more!