Beats Fit Pro Keep Disconnecting? – (Easy Fix In Minutes)

If the Beats Fit Pro keep disconnecting, this guide offers the best troubleshooting on the web!

The Beats Fit Pro earbuds’s advanced interface allows them to produce high-quality sounds with over-the-top user feedback via Bluetooth.

So, a potential connection failure, wireless interference, and even charging issues can cause the Beats Fit Pro to lose the connection.

Whenever the Beats Fit Pro keeps losing connection, re-charge the case, re-insert the earbuds, and check for wireless interference.

If the fault persists, re-add the Beats Fit Pro and perform a factory reset.

Let’s identify what causes the Beats to disconnect! 

Why Do My Beats Fit Pro Keep Disconnecting?

Knowing what can potentially impact the connection of your Beats Fit and cause them to unpair from your mobile is crucial to solving the issue. 

The Beats Fit Pro earbuds can lose connection due to Bluetooth issues, interference, and charging problems with the earbuds or case.

This is generalized, below is an in-depth look.

Here’s everything that can cause the Beats Fit Pro to lose connection:

Your Beats Fit Pro earbuds may lose connection due to one of the reasons we’ve reviewed above.

So, proceed with the troubleshooting guide to uncover expert solutions to the issue.

Beats Fit Pro Keep Disconnecting – Quick & Working Fixes

Tip: Follow the solutions in consecutive order.

1. Re-insert the Beats Earbuds

The first and most standard solution against connection issues with the Beats Fit Pro is to place the earbuds back into the case, wait a bit, and take them out. 

The earbuds use automatic pairing technology, so they will pair as long as your device’s Bluetooth is enabled.

Note: For the Beats to pair automatically, they must have a Bluetooth profile on your device.

So, place the Beats Fit Pro back into the charging case and close the lid.

Wait for at least 15–20 seconds, open the lid, and remove both earbuds from the case to initiate the pairing process.

Tip: You can track the connection status next to the earbuds’s profile in your mobile’s settings.

2. Fully Charge the Beats Fit Earbuds

Exhausted electrical supply of the Beats earbuds can lead to consistent losses in the Bluetooth connection with your device.

Hence, to address issues with the wireless signal, you should fully recharge the Beats Fit case and each earbud to sustain their proper Bluetooth connectivity.

Here’s how to fully re-charge the Beats Fit Pro earbuds and the charging case:

1. Plug the USB type-C cable into a power adapter.
2. Connect the adapter with a working A/C outlet.
3. Plug the other end of the cable with your earbuds.
4. Wait for 15–20 minutes until your Beats recharge.

If you’re charging the Beats with the original cable, optimal re-charging takes 30–40 minutes if the power source is proper.

Recharging the earbuds with unoriginal cable may take up to an hour and a half for optimal recharging, and you can track the status via the device’s LED light.

Note: The Beats Fit can function normally even at 10% battery!

3. Re-enable your Device’s Bluetooth

A problem in your device’s Bluetooth connection can cause the Beats Fit Pro earbuds to lose connection or experience interference. 

If the issue is on the software end, you can quickly address your connection inconsistency by re-enabling the Bluetooth feature.

How to Restart Bluetooth On Android?

1. Pull down the quick menu on your Android.
2. Tap the Bluetooth icon to turn off the feature.
3. Activate your Bluetooth after 10–15 seconds.

How to Restart Bluetooth On Apple’s iOS?

1. Open the “Settings” app and tap “Bluetooth.”
2. Next, tap the green slider at the top of the tab.
3. Wait for 5–7 seconds and tap the slider again.

How to Restart Bluetooth On Windows & Mac?

1. Open the “Settings” and go to “Bluetooth.”
2. Press on the activation slider to deactivate.
3. Wait for 10 seconds and activate Bluetooth.

It is important to keep the Bluetooth deactivated for at least 10 seconds and verify that no other devices are connected to your mobile.

The wireless signal emitted by the earbuds can congest with signal sent by another device, causing each of the Bluetooth transmitters to unpair quickly.

4. Forget & Re-Add the Beats Fit Pro

Another standard solution if the Beats Fit Pro keep cutting out from your device is to forget and re-add the Bluetooth profile of the earbuds.

Misconfigured settings or particular activity settings can cause the Beats to lose connection from your device and unpair from Bluetooth constantly.

How to Re-Add Beats Fit Pro On Android?

1. Open the Settings app on the Android mobile.
2. Access the “Bluetooth” tab within the settings.
3. Scroll down and find the “Beats Fit” connection.
4. Tap on the Settings icon to access the options.
5. Scroll down and tap on “Remove This Device.”
6. Place the earbuds back into the charging case.
7. Hold the “System” button to initiate the pairing.

How to Re-Add Beats Fit Pro On iOS?

1. Open the “Settings” app on your Apple device.
2. Tap on the “Bluetooth” menu for quick access.
3. Locate the “Beats Fit Pro” profile from below.
4. Next, tap on the “Info” icon next to the earbuds.
5. Scroll down and tap on “Remove this Device.”
6. Hold the “System” button on the charging case.
7. Once found by your device, press on “Connect.”

How to Re-Add Beats Fit Pro On Windows & iOS?

1. Access the start menu (Windows) or Finder (iOS.)
2. Next, type “Bluetooth” and enter the devices menu.
3. Locate Beats Fit Pro and press on “Forget Device.”
4. Re-add the earbuds after holding the “System” button.

Note: The Beats Fit Pro earbuds are added identically to Mac or Windows PC devices.

5. Unpair the Beats From Other Devices

The Beats Fit Pro’s signal can conflict if another device is paired via Bluetooth in the range of the earbuds.

That’s why the next step is to ensure that the Beats Pro earbuds are added only to a single device and that the profile is not shared by other Bluetooth receivers within range.

So, follow the instructions earlier in the guide to forget the Beats’s connection from other devices within range to resolve the issue.

• Don’t forget that disconnecting the earbuds will not work, as you have to remove the Bluetooth profile from within the settings entirely.

Note: Do not add the Beats Fit Pro to another device unless for testing purposes!

6. Force a Factory Reset on the Earbuds

You can solve issues with the Beats Fit Pro earbuds by forcing a system (factory) restoration process of the charging case. 

The reset can only be achieved if the case and the earbuds are charged sufficiently and the system button on the charging case is held long enough.

Warning: Factory restoring the Beats Fit Pro will unpair the buds from all devices!

Here’s how to perform a factory reset on the Beats Fit Pro efficiently:

1. Place both Beats Fit earbuds into the charging case.
2. Hold the “System” button on the case for 15 seconds.
3. Wait until the LED indicator flashes red and then white.
4. Next, release the system button and wait for 30 seconds.
5. Take both of the earbuds out from the case and then test.

Notice: After the factory reset, you must re-add and reconnect with the earbuds.

7. Test Earbuds on a Different Device

It can be possible that the connection inconsistency is caused by the device rather than the earbuds or the wireless signal.

To determine if there’s an issue with the Bluetooth protocols of your device, you should connect the Beats Fit to an alternative mobile or desktop device.

Here’s how to connect the Beats Fit Pro to a new device:

1. Open the “Bluetooth” settings on the testing unit.
2. Tap “Add Device” or go to “Discovered Devices.”
3. Hold the “System” button on the Beats Fit earbuds.
4. Once it appears in the menu, tap on your earbuds.
5. Wait until the earbud’s status changes to “Paired.”

Important: Remember that only one device at a time can be paired with the Beats Fit Pro!

Quick Recap

The best solution when Beats Fit Pro keep disconnecting, is to re-insert the earbuds and reset your device’s Bluetooth settings.

Also, delete and re-add the earbuds’s connection, force a factory reset, and test on a different device.

Follow us for more Bets Fit Pro guides!