Beats Fit Pro Connected But No Sound? – Easy Fix Guide

Beats Fit Pro connected but no sound? No worries, this is a widely spread Beats problem!

Sometimes even when your Beats Fit Pro is connected, the sound may be gone due to issues with your system, audio settings, or the earbuds.

So, this guide will show you an all-in-one fix that you can use to resolve the audio issue on your Beats Fit Pro earbuds, so let’s check it out.

When Beats Fit Pro is “connected” but there is no sound, increase your device’s output volume, restart the Bluetooth, and if needed, re-pair your Beats.

Also, you may need to configure the Equalizer settings or reset your Beats.

To unwrap how all of this is done, keep reading…

How to Fix When Beats Fit Pro Connected But No Sound?

Info: The solution consists of 6 chronological troubleshooting steps!

1. Increase Your Output Volume

If you don’t hear sound through your Beats Fit Pro, even if it says “Connected,” it’s likely that your playout device’s volume is set to a minimum.

So, we’re going to show you how to increase the output volume on popular operating systems, including Apple iOS, Android, and Windows.

• On iOS and Android, simply use the Volume buttons on the side of your phone to increase the output volume to at least 75%.

How to Increase Output Volume on Windows?

If you’re not hearing sounds through Beats Fit Pro on Windows, follow the steps below:

1. First, from the Taskbar, click on the Audio icon.
2. Then, the Windows audio prompt should appear.
3. Drag the slider to the right to increase the volume.

When your device’s audio is increased, you should start hearing sound from the Beats Fit Pro, so play some music to justify whether this helped. 

Note: Increasing sound to the highest possible level is not recommended for the safety of your ears and your Beats Fit Pro hardware.

2. Toggle Bluetooth OFF and ON

Well, sometimes you can’t hear audio through your Beats Fit Pro simply due to a software bug, in most cases related to the Bluetooth connection.

So a straightforward and quick solution that helped a lot of users with the same problem is to toggle “OFF” and “ON” your Bluetooth setting.

This will cause your Beats Fit Pro to disconnect from your device, but only temporarily until you toggle the Bluetooth on.

Then, the earbuds will automatically pair, and the sound should return.

How to Restart Bluetooth on Android?

1. From the main screen, go to “Settings.”
2. Then, go to the “Connections” section.
3. Tap the switch next to the “Bluetooth.”
4. Wait a few seconds and turn it back on.

How to Restart Bluetooth on Apple iOS?

1. From the home screen, go to “Settings.”
2. Then select “Bluetooth” from the menu.
3. Tap the toggle to disable the Bluetooth.
4. Wait a few moments and turn it back on.

How to Restart Bluetooth on Windows?

1. Open the “Quick Menu” from the Taskbar.
2. Info: Click the “Network” icon on the right.
3. In the Quick Menu, toggle off/on Bluetooth.

Note: If your Windows computer does not have an in-built Bluetooth and you’re using a dongle, unplug the USB Bluetooth for a few seconds and plug it back in.

3. Set Beats as “Default” Output

Not hearing sound through your Beats Fit Pro is a very common occurrence on Windows PCs, due to the default output device selected in the settings. 

For example, if you have any speakers, headphones, or even a monitor with in-built speakers, Windows may still use those devices for audio output, instead of your connected Beats Fit Pro.

So, it’s quite important to open the settings and choose your connected Beats Fit Pro to be the default output device for your computer. 

Here’s how to set your Beats as the default audio output on Windows:

1. From the Start Menu, go to the Control Panel.
2. Select “Hardware and Sound,” then “Sound.”
3. Under the “Playback” tab, right-click Beats Fit.
4. From the menu, select “Set as Default Device.”

This should immediately make your Beats Fit Pro default output device, so play some music to check whether the sound will now start to play. 

If not, keep reading…

Note: This step is only applicable for Windows 10 and 11 computers/laptops!

4. Unpair & Pair the Beats Fit Pro

Your Beats Fit Pro says connected but no sound? Well, this seems like a Bluetooth problem!

The Bluetooth connection remains the primary suspect for audio loss on Beats Fit Pro, so in this step, we’re going to show you how to unpair and pair them. 

Regardless of whether you use iOS, Android, or Windows, reconnecting your Beats Fit Pro to the playback device is one of the most helpful solutions you can try.

Info: The steps below show you how to “Forget” the Beats Bluetooth connection and reconnect!

How to Unpair → Pair Beats on Android?

1. From the main screen, go to “Settings.”
2. Choose the “Connected Devices” tab.
3. Press “Previously connected device.”
4. If your Bluetooth is “OFF,” turn it “ON.”
5. Select your Beats Fit Pro connection.
6. Tap “FORGET” to disconnect the buds.
7. On your Beats, hold the “Pairing” button.
8. Release when the LED starts to pulsate.
9. In the Bluetooth list, tap them to connect.

How to Unpair → Pair Beats on Apple iOS?

1. On the iPhone/iPad, go to the “Settings.”
2. Select the “Bluetooth” and turn it “ON.”
3. Tap the “i” icon next to your Beats Pro.
4. Tap “Forget this device” to disconnect.
5. Then hold the Beats’s “Pairing” button.
6. Release the button when the LED pulses.
7. In the Bluetooth menu, tap the connection.

Note: Alternatively, put the earbuds in the case by keeping the lid open near your unlocked iOS device, and wait for the automatic pairing prompt to appear.

How to Unpair → Pair Beats on Windows?

1. Click on the Bluetooth icon from the Taskbar.
2. Alternatively, reveal the Windows Quick Menu.
3. Select “Show Bluetooth Devices” to reveal it.
4. Select your Beats Fit Pro → “Remove Device.”
5. Then, hold the Beats Fit Pro “Pairing Button.”
6. Release when the LED starts to slowly pulsate.
7. Then open the Bluetooth menu and select them.

When your Beats Fit Pro is reconnected to your playback device, you should no longer face Bluetooth connectivity issues and the sound must be there. 

Note: If you still don’t hear audio through your Beats Fit Pro, try playing a different song/video or sound to eliminate the possibility of muted track audio.

5. Configure the Equalizer Settings

The Equalizer is an audio setting available on most operating systems including iOS, Android, and Windows.

The option uses an understanding of human hearing to reduce the perceived volume differences and when set to the minimum, you won’t hear sound from the Beats Fit Pro.

That’s why it’s important to check the settings and increase the volume level, so we’ve prepared steps for the most popular operating systems.

Equalizer for iPhone and iPad:

1. From the main screen, go to “Settings.”
2. Then, go down to the “Music” section.
3. From there, locate the (EQ) Equalizer.
4. Select the Equalizer Preset to utilize.

Equalizer for Android Phones:

1. From the main screen, go to Settings.
2. Next, go down and select “Equalizer.”
3. Turn on “Equalizer” and select preset.

Equalizer for Windows System:

1. From the Start, go to the Control Panel.
2. Click “Hardware and Sound” → “Sound.” 
3. In the “Playback” tab, click on the speaker.
4. In your case, that would be the Beats Pro.
5. Then, click the “Properties” button below.
6. Navigate to the “Enhancements” section.
7. Check the “Equalizer” checkbox in the tab.
8. Click on “Settings” to reveal the options.
9. Drag the slider to position it in the middle.

When you’re ready to configure the Equalizer settings on your playback device, play some music to check if your Beats Fit Pro will start producing sounds.

6. Factory the Reset Beats Fit Pro

If you still can’t hear audio through your Beats Fit Pro, it’s time to perform a factory reset, which is a guaranteed way to resolve issues with the buds.

The factory reset will ultimately disconnect your earbuds from the playback device, so you’ll need to re-do the pairing process from scratch.

Here’s how to factory reset Beats Fit Pro in easy steps:

1. First, put both Beats Fit Pro earbuds in your case.
2. Then, leave the case open during the factory reset.
3. Hold the case’s “System” button for 15 seconds.
4. Release the button after the LED flashes white/red.

When the factory reset is over, pair your Beats Fit Pro to your playback device and test whether the audio problem is gone.

Beats Fit Pro Connected But No Sound iPhone?

With iPhones (iOS system), two options in particular can prevent your Beats from outputting any audio and be completely mute.

So, let’s take a quick look at what you can do against the issue.

Mute Switch (Silent Mode)

Introduced more than 10 years ago, every iPhone has a mute switch on the side, right above the volume buttons.

When this switch is “ON,” your iPhone goes into a silent mode that mutes all sounds from your device, including the audio output from the phone to your Beats Fit Pro buds.

So, verify that the mute switch on the side of your iPhone is toggled “OFF.”

Stop Reduce Loud Sounds

There is an option on iPhones that automatically lowers the audio output from your device when the sound is considered “too loud.”

Well, this option may be the reason why you don’t hear anything through your Beats Fit Pro, so it’s important to test without this option enabled. 

• Go to “Settings” → “Sound & Haptics” → “Headphones Safety” and toggle “OFF” the “Reduce Loud Sounds.”

This should solve your Beats Fit Pro audio problem on your iPhone!

Quick Recap

So, when Beats Fit Pro connected but no sound, increase the device’s volume, unpair and pair your Beats, and configure the Equalizer settings.

If your audio issues continue, factory reset your Beats Fit Pro.

Follow us for more!